Renovations & new builds
Renovation electrical is about getting the planning right before the plaster goes on. We work alongside your builder or directly with you to lay out lighting, power and appliance circuits that suit the finished space.
Oven, cooktop & hot water · Melbourne
Most ovens, cooktops and hot water systems must be hardwired by a licensed electrician, and the retailer delivery team will not do it. We connect new appliances and upgrade circuits for induction and larger units.
“Anthony replaced our old fuse box the same week we called. Price was exactly what he quoted and he labelled everything so we actually know what each switch does now.”
“Supplied and installed a split system in the main bedroom. Turned up on time, cleaned up after himself, and talked us out of a bigger unit we did not need.”
“Our safety switch kept tripping at night. He found a damaged cable in the roof within the hour and fixed it on the spot. Honest and easy to deal with.”
“Swapped 22 halogen downlights for LEDs. Neat job, no mess, and the house is noticeably cooler in the evenings. Would use again.”
“Installed a 7kW charger in the garage with load management. Explained the options clearly and sorted the certificate of electrical safety without us asking.”
“Did the two-yearly safety check on our rental and had the report to the agent the same afternoon. No upselling, just a clear list of what was fine and what was not.”
“Wired our whole kitchen reno, strip lighting, induction circuit, the lot. Worked in with the cabinet maker and plasterer without any drama.”
“Lighting and power for our shop fit-out. Came in after hours so we could stay open and everything was signed off before the launch.”
What is included
Hardwired ovens, induction cooktops, rangehoods and hot water.
You talk to Anthony, not a call centre, and get an honest read on urgency and cost.
We confirm the price up front. If something unexpected turns up, we stop and ask you first.
Tested, labelled and left clean, with a Certificate of Electrical Safety where the work requires one.
A like-for-like oven swap on an existing circuit is quick. Going from gas to induction usually needs a new heavy circuit and sometimes a switchboard change. We confirm what is needed from a photo of your board.
Where we work
We are based in South Morang, so Mill Park, Epping, Mernda, Doreen, Bundoora and Greensborough are minutes away. We regularly work right across the metro area, from the CBD to the outer suburbs.
FAQ
Yes, and many Melbourne households are doing it. It needs a dedicated circuit, typically 32A, and we check your switchboard can supply it.
Related
Renovation electrical is about getting the planning right before the plaster goes on. We work alongside your builder or directly with you to lay out lighting, power and appliance circuits that suit the finished space.
A lot of Melbourne homes built before the 1990s still run on ceramic fuses or a board with no safety switches. A new switchboard is the single biggest safety improvement you can make, and it is usually the first step before adding air conditioning, an EV charger or solar.
Running extension leads across rooms is how a lot of electrical fires start. Adding power points where you actually need them is quick, tidy and cheaper than most people expect.
Get a quote
We will reply with a fixed price or a couple of quick questions. Photos of the switchboard or the area help a lot.