Skip to content

Switchboard upgrades · Melbourne

Switchboard upgrades and replacements

A lot of Melbourne homes built before the 1990s still run on ceramic fuses or a board with no safety switches. A new switchboard is the single biggest safety improvement you can make, and it is usually the first step before adding air conditioning, an EV charger or solar.

5.0 from 8 Google reviewsSample reviewsRead all reviews
  • Sept 2026

    “Anthony replaced our old fuse box the same week we called. Price was exactly what he quoted and he labelled everything so we actually know what each switch does now.”

    MelissaMill Park · Switchboard upgrade
  • Aug 2026

    “Supplied and installed a split system in the main bedroom. Turned up on time, cleaned up after himself, and talked us out of a bigger unit we did not need.”

    DanielMernda · Split system install
  • Oct 2026

    “Our safety switch kept tripping at night. He found a damaged cable in the roof within the hour and fixed it on the spot. Honest and easy to deal with.”

    PriyaEpping · Safety switch tripping
  • July 2026

    “Swapped 22 halogen downlights for LEDs. Neat job, no mess, and the house is noticeably cooler in the evenings. Would use again.”

    MarkGreensborough · LED downlights
  • June 2026

    “Installed a 7kW charger in the garage with load management. Explained the options clearly and sorted the certificate of electrical safety without us asking.”

    SarahDoreen · EV charger
  • Sept 2026

    “Did the two-yearly safety check on our rental and had the report to the agent the same afternoon. No upselling, just a clear list of what was fine and what was not.”

    TonyBundoora · Rental safety check
  • May 2026

    “Wired our whole kitchen reno, strip lighting, induction circuit, the lot. Worked in with the cabinet maker and plasterer without any drama.”

    JessSouth Morang · Kitchen renovation
  • Aug 2026

    “Lighting and power for our shop fit-out. Came in after hours so we could stay open and everything was signed off before the launch.”

    ChrisThomastown · Shop fit-out

What is included

What we do for switchboard upgrades.

Replace old fuse boxes with safety switches and room to grow.

  • Full switchboard replacement with RCD protection on every circuit
  • Upgrading from ceramic fuses to circuit breakers
  • Adding capacity for split systems, EV chargers, induction cooktops and solar
  • Single to three-phase upgrades where your supply allows
  • Meter board tidy-ups, surge protection and proper circuit labelling
  • Defect notice rectification and coordination with your distributor

No surprises. That is the whole point.

  1. Call or send the job through

    You talk to Anthony, not a call centre, and get an honest read on urgency and cost.

  2. Fixed price before we start

    We confirm the price up front. If something unexpected turns up, we stop and ask you first.

  3. Done properly, tested, certified

    Tested, labelled and left clean, with a Certificate of Electrical Safety where the work requires one.

Pricing

Know the cost before we start.

Switchboard upgrades vary with the number of circuits, whether the mains and earthing also need work, and whether you are going to three phase. We inspect first and quote a fixed price. We will not start on a quote that might grow.

Ask for a price

Where we work

Fast to the northern suburbs. Available across Melbourne.

We are based in South Morang, so Mill Park, Epping, Mernda, Doreen, Bundoora and Greensborough are minutes away. We regularly work right across the metro area, from the CBD to the outer suburbs.

FAQ

Switchboard upgrades: questions we get asked.

How do I know if my switchboard needs upgrading?

Ceramic fuses, no safety switch, a board that trips when you run the kettle and heater together, or a plan to add a split system or EV charger are all signs. We can also check it as part of any other job.

How long does a switchboard upgrade take?

Most residential upgrades are done in a day. Power is off for a good part of that day, and we let you know the timing so you can plan around it.

Do I need a three-phase upgrade for an EV charger?

Not usually. A single-phase 7kW charger suits most households. Three phase makes sense for 22kW charging, large ducted systems or workshops.

Related

Often booked together.

Safety switches & RCDs

A safety switch cuts power in milliseconds when it detects current leaking to earth, which is what happens when a person is getting a shock. Many older homes only have one, or none at all, covering lights and power.

EV charger installation

Charging at home overnight is cheaper and easier than public charging, and a dedicated wall charger is far faster than the portable cable in the boot. We install chargers for all major EV brands.

House rewiring

Homes from the 1970s and earlier across Melbourne often still have original wiring with brittle insulation. A rewire is a big job, but done at the right time, usually before a renovation, it is the foundation for everything else.

Get a quote

Tell us about the switchboard upgrades job.

We will reply with a fixed price or a couple of quick questions. Photos of the switchboard or the area help a lot.

How urgent?

We reply within business hours, usually within the hour. Urgent? Call 0413 682 993.

Call 0413 682 993 Get a quote