Skip to content

Fault finding & repairs · Melbourne

Electrical fault finding and repairs

Intermittent faults are the ones that frustrate people most. We test methodically, circuit by circuit, so you pay to fix the actual problem rather than a guess.

5.0 from 8 Google reviewsSample reviewsRead all reviews
  • Oct 2026

    “Our safety switch kept tripping at night. He found a damaged cable in the roof within the hour and fixed it on the spot. Honest and easy to deal with.”

    PriyaEpping · Safety switch tripping
  • Sept 2026

    “Anthony replaced our old fuse box the same week we called. Price was exactly what he quoted and he labelled everything so we actually know what each switch does now.”

    MelissaMill Park · Switchboard upgrade
  • Aug 2026

    “Supplied and installed a split system in the main bedroom. Turned up on time, cleaned up after himself, and talked us out of a bigger unit we did not need.”

    DanielMernda · Split system install
  • July 2026

    “Swapped 22 halogen downlights for LEDs. Neat job, no mess, and the house is noticeably cooler in the evenings. Would use again.”

    MarkGreensborough · LED downlights
  • June 2026

    “Installed a 7kW charger in the garage with load management. Explained the options clearly and sorted the certificate of electrical safety without us asking.”

    SarahDoreen · EV charger
  • Sept 2026

    “Did the two-yearly safety check on our rental and had the report to the agent the same afternoon. No upselling, just a clear list of what was fine and what was not.”

    TonyBundoora · Rental safety check
  • May 2026

    “Wired our whole kitchen reno, strip lighting, induction circuit, the lot. Worked in with the cabinet maker and plasterer without any drama.”

    JessSouth Morang · Kitchen renovation
  • Aug 2026

    “Lighting and power for our shop fit-out. Came in after hours so we could stay open and everything was signed off before the launch.”

    ChrisThomastown · Shop fit-out

What is included

What we do for fault finding & repairs.

Find the real cause of tripping, flickering and dead circuits.

  • Insulation resistance and earth testing to locate wiring faults
  • Dead or intermittent power points and lighting circuits
  • Nuisance tripping on RCDs and circuit breakers
  • Loose neutrals, damaged cables and rodent damage in roof spaces
  • Faults on hot water, oven, cooktop and air conditioning circuits
  • Repairs completed and tested on the spot where parts allow

No surprises. That is the whole point.

  1. Call or send the job through

    You talk to Anthony, not a call centre, and get an honest read on urgency and cost.

  2. Fixed price before we start

    We confirm the price up front. If something unexpected turns up, we stop and ask you first.

  3. Done properly, tested, certified

    Tested, labelled and left clean, with a Certificate of Electrical Safety where the work requires one.

Pricing

Know the cost before we start.

Fault finding is charged for the time it takes to locate the problem, and we give you a realistic estimate on the phone once we understand the symptoms. The repair itself is then quoted as a fixed price.

Ask for a price

Where we work

Fast to the northern suburbs. Available across Melbourne.

We are based in South Morang, so Mill Park, Epping, Mernda, Doreen, Bundoora and Greensborough are minutes away. We regularly work right across the metro area, from the CBD to the outer suburbs.

FAQ

Fault finding & repairs: questions we get asked.

Why do my lights flicker only sometimes?

Common causes are a loose neutral connection, an overloaded circuit, or a failing dimmer paired with LED globes. Flickering across the whole house can also point to a supply issue that needs checking at the switchboard.

Can you find a fault if it is not happening when you arrive?

Usually, yes. Insulation and continuity testing shows up weak points even when the circuit is currently working, and we ask detailed questions about when it happens to narrow it down.

Related

Often booked together.

Emergency electrician

Electrical faults do not keep business hours. If something has gone wrong and you are not sure it is safe, call us. We will tell you honestly over the phone whether it can wait or whether we should come now.

Safety switches & RCDs

A safety switch cuts power in milliseconds when it detects current leaking to earth, which is what happens when a person is getting a shock. Many older homes only have one, or none at all, covering lights and power.

House rewiring

Homes from the 1970s and earlier across Melbourne often still have original wiring with brittle insulation. A rewire is a big job, but done at the right time, usually before a renovation, it is the foundation for everything else.

Get a quote

Tell us about the fault finding & repairs job.

We will reply with a fixed price or a couple of quick questions. Photos of the switchboard or the area help a lot.

How urgent?

We reply within business hours, usually within the hour. Urgent? Call 0413 682 993.

Call 0413 682 993 Get a quote