Skip to content

Safety switches & RCDs · Melbourne

Safety switch (RCD) installation and testing

A safety switch cuts power in milliseconds when it detects current leaking to earth, which is what happens when a person is getting a shock. Many older homes only have one, or none at all, covering lights and power.

5.0 from 8 Google reviewsSample reviewsRead all reviews
  • Sept 2026

    “Anthony replaced our old fuse box the same week we called. Price was exactly what he quoted and he labelled everything so we actually know what each switch does now.”

    MelissaMill Park · Switchboard upgrade
  • Aug 2026

    “Supplied and installed a split system in the main bedroom. Turned up on time, cleaned up after himself, and talked us out of a bigger unit we did not need.”

    DanielMernda · Split system install
  • Oct 2026

    “Our safety switch kept tripping at night. He found a damaged cable in the roof within the hour and fixed it on the spot. Honest and easy to deal with.”

    PriyaEpping · Safety switch tripping
  • July 2026

    “Swapped 22 halogen downlights for LEDs. Neat job, no mess, and the house is noticeably cooler in the evenings. Would use again.”

    MarkGreensborough · LED downlights
  • June 2026

    “Installed a 7kW charger in the garage with load management. Explained the options clearly and sorted the certificate of electrical safety without us asking.”

    SarahDoreen · EV charger
  • Sept 2026

    “Did the two-yearly safety check on our rental and had the report to the agent the same afternoon. No upselling, just a clear list of what was fine and what was not.”

    TonyBundoora · Rental safety check
  • May 2026

    “Wired our whole kitchen reno, strip lighting, induction circuit, the lot. Worked in with the cabinet maker and plasterer without any drama.”

    JessSouth Morang · Kitchen renovation
  • Aug 2026

    “Lighting and power for our shop fit-out. Came in after hours so we could stay open and everything was signed off before the launch.”

    ChrisThomastown · Shop fit-out

What is included

What we do for safety switches & RCDs.

RCD protection on every circuit, tested and certified.

  • Installing RCDs on power, lighting, hot water, oven and air conditioning circuits
  • Replacing combined RCD/MCB units that trip without cause
  • Testing existing safety switches for trip time and sensitivity
  • Rental compliance for the Victorian minimum standards
  • Advice on which circuits to separate so one fault does not black out the house

No surprises. That is the whole point.

  1. Call or send the job through

    You talk to Anthony, not a call centre, and get an honest read on urgency and cost.

  2. Fixed price before we start

    We confirm the price up front. If something unexpected turns up, we stop and ask you first.

  3. Done properly, tested, certified

    Tested, labelled and left clean, with a Certificate of Electrical Safety where the work requires one.

Pricing

Know the cost before we start.

Adding a safety switch to an existing board with spare room is a quick job. If the board is full or old, it is often better value to upgrade the whole switchboard. We will tell you which applies before quoting.

Ask for a price

Where we work

Fast to the northern suburbs. Available across Melbourne.

We are based in South Morang, so Mill Park, Epping, Mernda, Doreen, Bundoora and Greensborough are minutes away. We regularly work right across the metro area, from the CBD to the outer suburbs.

FAQ

Safety switches & RCDs: questions we get asked.

Are safety switches compulsory in Victoria?

New circuits and switchboard work require RCD protection under the wiring rules, and rental properties must meet the Victorian minimum standards for electrical safety. Older homes are not forced to retrofit, but we strongly recommend it.

Why does my safety switch trip when it rains?

Moisture getting into outdoor power points, garden lighting or a roof-space junction is the usual cause. We can isolate the circuit and find the ingress point.

Related

Often booked together.

Meter box with underground conduits running through a trench on a new build

Switchboard upgrades

A lot of Melbourne homes built before the 1990s still run on ceramic fuses or a board with no safety switches. A new switchboard is the single biggest safety improvement you can make, and it is usually the first step before adding air conditioning, an EV charger or solar.

Rental safety checks

Under the Victorian rental minimum standards, rental providers must have an electrical safety check done by a licensed electrician every two years and keep the record. We make it painless for landlords and property managers.

Fault finding & repairs

Intermittent faults are the ones that frustrate people most. We test methodically, circuit by circuit, so you pay to fix the actual problem rather than a guess.

Get a quote

Tell us about the safety switches & RCDs job.

We will reply with a fixed price or a couple of quick questions. Photos of the switchboard or the area help a lot.

How urgent?

We reply within business hours, usually within the hour. Urgent? Call 0413 682 993.

Call 0413 682 993 Get a quote