Skip to content

Smoke alarms · Melbourne

Smoke alarm installation and replacement

Smoke alarms have a ten-year life and most people have never checked the date on theirs. We replace expired units, add alarms where the regulations require them and interconnect them so every alarm sounds together.

5.0 from 2 Google reviewsRead them on Google

What is included

What we do for smoke alarms.

Hardwired photoelectric alarms, interconnected and tested.

  • Replacing alarms older than ten years
  • Hardwired 240V photoelectric alarms with battery backup
  • Interconnected alarms so the whole house is alerted
  • Alarms in every bedroom hallway and on every level
  • Rental property compliance and annual testing
  • Advice on placement to avoid nuisance alarms near kitchens

No surprises. That is the whole point.

  1. Call or send the job through

    You talk to Anthony, not a call centre, and get an honest read on urgency and cost.

  2. Fixed price before we start

    We confirm the price up front. If something unexpected turns up, we stop and ask you first.

  3. Done properly, tested, certified

    Tested, labelled and left clean, with a Certificate of Electrical Safety where the work requires one.

Pricing

Know the cost before we start.

Replacing a like-for-like hardwired alarm is a quick, low-cost job. Adding new alarms to rooms that do not have wiring takes longer. We quote the full set as one fixed price.

Ask for a price

Where we work

Fast to the northern suburbs. Available across Melbourne.

We are based in South Morang, so Mill Park, Epping, Mernda, Doreen, Bundoora and Greensborough are minutes away. We regularly work right across the metro area, from the CBD to the outer suburbs.

FAQ

Smoke alarms: questions we get asked.

Do rental properties in Victoria need interconnected smoke alarms?

Rental providers must ensure alarms are correctly installed, working and tested annually. Interconnection is required for new builds and major renovations, and we recommend it in every home.

Related

Often booked together.

Rental safety checks

Under the Victorian rental minimum standards, rental providers must have an electrical safety check done by a licensed electrician every two years and keep the record. We make it painless for landlords and property managers.

Safety switches & RCDs

A safety switch cuts power in milliseconds when it detects current leaking to earth, which is what happens when a person is getting a shock. Many older homes only have one, or none at all, covering lights and power.

Meter box with underground conduits running through a trench on a new build

Switchboard upgrades

A lot of Melbourne homes built before the 1990s still run on ceramic fuses or a board with no safety switches. A new switchboard is the single biggest safety improvement you can make, and it is usually the first step before adding air conditioning, an EV charger or solar.

Get a quote

Tell us about the smoke alarms job.

We will reply with a fixed price or a couple of quick questions. Photos of the switchboard or the area help a lot.

How urgent?

We reply within business hours, usually within the hour. Urgent? Call 0413 682 993.

Call 0413 682 993 Get a quote