Skip to content

Upgrades · 28 July 2026 · 6 min read

Home EV Charger Installation in Victoria: What You Need to Know

Planning a home EV charger in Victoria? Single vs three phase, 7kW vs 22kW, load management, solar charging and approvals explained by a licensed electrician.

Electric vehicle uptake in Victoria has climbed steadily, and more of the people ringing us from Melbourne’s northern suburbs are asking the same question: what do I actually need at home to charge the thing? Plugging into a standard power point works in a pinch, but it is slow and not designed for hours of continuous load. A dedicated home charger is safer, faster and usually cheaper to run.

This guide covers what matters before you book an install: your electrical supply, charger size, load management, solar and the paperwork.

Start with your car, not the charger

Before you shop for a charger, check what your car can accept. Every EV has an onboard charger that sets the ceiling for AC charging, no matter how powerful the wall unit is.

  • Many popular EVs sold in Australia accept up to 7kW on a single phase supply.
  • Many accept 11kW on three phase.
  • Very few accept 22kW AC.

Buying a 22kW charger for a car that tops out at 11kW, or 7kW, gets you nothing extra. Check the manual or the manufacturer’s spec for “maximum AC charging rate” and whether it is rated for single or three phase.

Single phase vs three phase

Most Melbourne homes have single phase power. Some, particularly larger or newer homes and anything with a ducted system or workshop, have three phase. You can usually tell by looking at the main switch in your switchboard: three linked switches (or a three-pole switch) suggests three phase. Your electrician can confirm quickly.

Single phase

On a single phase supply, a charger typically delivers up to about 7kW (32 amps). That adds roughly 30 to 40 kilometres of range per hour, depending on the car. For most households, an overnight charge on 7kW is more than enough to cover daily driving.

Three phase

Three phase allows faster AC charging, up to about 11kW for most cars that support it, and up to 22kW for the few that do. It also spreads the load across phases, which helps if you already run heavy appliances. If you are on single phase and tempted to upgrade to three phase for charging alone, think carefully. The upgrade involves the electricity distributor and can be a significant cost, and many drivers will never notice the difference in daily use.

7kW vs 22kW: which do you need?

For most households, 7kW is the sensible answer. Here is why:

  • Overnight charging is usually 8 to 10 hours, which at 7kW adds a large amount of range.
  • Off-peak and low-rate periods fit neatly into overnight charging.
  • A 7kW unit is simpler and cheaper to install on a standard supply.

A 22kW charger makes sense only if your car can actually use it, you have three phase supply with enough capacity, and your driving pattern genuinely needs very fast home charging, for example for a business fleet. For anyone else, the extra money buys a faster number on the box and nothing more.

Load management

Home chargers draw a lot of current for a long time, and your supply has finite capacity. Load management stops the charger, the oven, the air conditioner and the hot water system from all pulling at once and tripping the main switch, or overloading the service cable.

There are two main approaches:

  • Static limiting, where the charger is set to a fixed maximum current that suits your supply.
  • Dynamic load management, where a meter or sensor watches your whole-house consumption and reduces the charger’s output when other loads spike.

Dynamic load management is worth considering if your supply is modest, if you cook and heat with electricity, or if you plan to add more equipment later. It can also allow a bigger charger on a supply that would otherwise not support it. We assess your existing load before recommending either.

EV charging with solar

If you have rooftop solar, charging your car from your own panels is the cheapest charging you will get, especially with feed-in tariffs in Victoria being modest compared with what you pay to buy power. Many chargers offer a solar or surplus mode that adjusts charging to match your excess generation. Others work with a smart meter or inverter data.

A few practical points:

  • Solar-aware charging works best if the car is home during the day, or you can shift charging to weekends.
  • If the car is away during the day, overnight charging on a cheap tariff may beat solar anyway.
  • Not every charger works with every inverter, so check compatibility before buying.

If you are planning solar, a battery and an EV together, it is worth designing the electrical side as a package, not three separate jobs.

What the installation involves

A standard install includes a dedicated circuit from the switchboard, correctly sized cable, a protective device and safety switch for the circuit, and the charger mounted on a wall or post. The position matters: close to where the car parks, protected from knocks and weather, and not in a spot where the cable becomes a trip hazard.

Switchboard capacity

The biggest variable is usually the switchboard. If there is no spare way, no safety switch protection or the board is old, it may need upgrading first. Our guide to the signs you need a switchboard upgrade covers what to watch for. Most of the time we can tell during the quote whether the existing board can take a charger.

Tethered or socket

A tethered unit has the cable permanently attached. A socketed unit lets you plug in your own cable, which is handy if you change cars or have visitors with different connectors. Most EVs in Australia use Type 2 connectors for AC charging, but check your own.

Approvals and paperwork

EV charger installation is prescribed electrical work in Victoria, so it must be done by a licensed electrician. We provide a Certificate of Electrical Safety on completion, which is lodged with Energy Safe Victoria. Keep a copy, since your insurer or a future buyer may ask for it.

If a supply upgrade or a change to your connection is needed, we coordinate with your electricity distributor. If you live in an apartment or townhouse with shared property, you may also need body corporate approval and a plan for metering your own use.

What it typically costs

Costs depend on the charger you choose, the cable run from the switchboard to the car space, switchboard condition and whether load management is required. As a broad guide, a straightforward single phase installation including a charger often falls somewhere between about $1,500 and $3,000. Longer cable runs, trenching, switchboard upgrades or three phase work cost more. That is a guide only, and we confirm a fixed price in writing before any work starts.

Need a hand?

If you are planning an EV or have just picked one up, call Anthony on 0413 682 993. We will look at your supply, recommend a sensible charger size for your car and your home, and give you a fixed price before any work begins.

Related services

Emergency electrician

Electrical faults do not keep business hours. If something has gone wrong and you are not sure it is safe, call us. We will tell you honestly over the phone whether it can wait or whether we should come now.

Fault finding & repairs

Intermittent faults are the ones that frustrate people most. We test methodically, circuit by circuit, so you pay to fix the actual problem rather than a guess.

Meter box with underground conduits running through a trench on a new build

Switchboard upgrades

A lot of Melbourne homes built before the 1990s still run on ceramic fuses or a board with no safety switches. A new switchboard is the single biggest safety improvement you can make, and it is usually the first step before adding air conditioning, an EV charger or solar.

Need an electrician today?

Call and you will speak to Anthony directly. Describe the job, get a straight answer and a fixed price before anything starts.

Call 0413 682 993 Get a quote