Guides · 18 August 2026 · 6 min read
Rental Electrical Safety Checks in Victoria: What Landlords Must Do
Victorian rental providers must arrange an electrical safety check at least every two years. What it covers, who can do it, safety switches and records to keep.
If you rent out a property in Victoria, you have a legal duty to make sure the electrics are safe, and to prove it. Since the rental minimum standards came in, rental providers (the term now used in place of landlord) must have an electrical safety check done at least every two years. It protects your tenant, your investment and you.
This guide explains what the check involves, who can do it, what usually gets flagged and what to keep on file. Rules and fees change, so confirm the latest detail with Consumer Affairs Victoria if you are unsure.
What the law requires
Under Victoria’s rental minimum standards, the electrical installation in a rented home must be checked by a licensed or registered electrician at least once every two years. The check must be recorded, and the report kept. You will be asked for it if there is a dispute, an insurance claim or a request from your tenant.
The standards also set out a few practical expectations:
- Safety switches (RCDs) must be installed to protect power and lighting circuits.
- The electrical installation must be safe and in good working order.
- Any electrical work needed to fix problems must be carried out by a licensed electrician.
The electrical safety check sits alongside a gas safety check, which has its own two-year cycle if the property has gas appliances or a gas supply. Smoke alarms are a separate obligation again: they must be installed and kept working in line with the Building Regulations and tenancy rules. It makes sense to deal with all of these in one planned round.
What does the check cover?
The check is carried out by a licensed electrician and is largely a visual inspection backed by testing. It focuses on whether the installation is safe, not whether it is modern. Typically an electrician will:
- Inspect the switchboard for condition, labelling and signs of overheating.
- Confirm that safety switches are installed and test that they trip when they should.
- Check visible wiring, power points, switches and light fittings for damage, exposure or signs of overload.
- Look at earthing and bonding where it can be seen.
- Note any unsafe DIY work or unlicensed alterations.
- Check that major fixed appliances, such as hot water systems and air conditioners, have safe connections.
The check does not mean opening up walls or testing every inch of cable, so it cannot guarantee that nothing is hidden. It does tell you whether the installation is safe in all the ways an electrician can reasonably see and test.
Safety switches in rentals
Safety switches are the most common failure point we see. Older rentals in Melbourne’s north, particularly those with original ceramic-fuse boards, often have none. The minimum standards require safety switches on the power and lighting circuits, which usually means a switchboard upgrade if the existing board has no room or no protection.
Our article on signs you need a switchboard upgrade explains what we look for, and why safety switches trip is worth passing to tenants who call about nuisance trips.
Who can do the check?
The check must be done by a licensed or registered electrician. You can verify any Victorian electrician’s licence through Energy Safe Victoria (ESV). Be wary of anyone who offers a “tick and flick” report without testing safety switches or looking inside the switchboard. Your name is on the compliance obligation, not theirs.
Certificate of Electrical Safety vs the safety check report
These two get confused, so it helps to be clear:
- The electrical safety check report is the record of the two-yearly inspection. It says whether the installation is safe and lists any defects.
- A Certificate of Electrical Safety is issued by the electrician after prescribed electrical work, such as installing a new switchboard, safety switches or a new circuit, and is lodged with ESV.
If the check finds problems and the fixes count as prescribed work, you will get a Certificate of Electrical Safety for those repairs, in addition to the check report. Keep both with the property records.
What happens if the check finds problems?
Findings usually fall into three groups:
- Urgent safety defects, such as exposed live wiring, burnt connections or no safety switch protection. These need fixing promptly.
- Compliance gaps, such as missing labelling or outdated components that should be addressed soon.
- Advice items, such as older but safe equipment you may want to plan to replace.
A good electrician will explain which is which, quote the repairs separately and give you a fixed price before doing any work. You are not obliged to fix every advisory item on the spot, but you do need to deal with anything that makes the installation unsafe.
Practical tips for rental providers
- Diarise it. Set a reminder for the next check as soon as the report arrives, ideally well before the two-year mark.
- Keep records. Store the report, the electrician’s name and licence details, and any Certificates of Electrical Safety.
- Give notice properly. Entry for inspections must follow the notice rules in the Residential Tenancies Act, so check the current requirements with Consumer Affairs Victoria.
- Respond to tenant reports. If a tenant tells you about flickering lights, tripping switches or burning smells, treat it as urgent. Do not wait for the next scheduled check.
- Share the report when asked. A tenant can ask for evidence that the check has been done.
- Bundle the work. Combining the electrical check, smoke alarm check and any repairs in one visit reduces tenant disruption.
What does it typically cost?
For a standard house or unit, an electrical safety check often costs in the order of a couple of hundred dollars, with larger or more complex properties costing more. Repairs are extra. That is a guide only. We confirm the price before we visit, and we quote any repair work separately so you can decide what to do.
Need a hand?
If you manage one rental or a portfolio across the northern suburbs, call Anthony on 0413 682 993. We will book a time that suits you and your tenant, test the installation properly and give you a clear report with fixed-price quotes for anything that needs attention.